2009.9-2015.6 上海交通大学机械与动力工程学院硕博连读
2005.9-2009.7 上海交通大学机械与动力工程学院本科

2018.10至今 上海交通大学机械与动力工程学院长聘教轨副教授
2017.9-2018.9 加州大学伯克利分校博士后
2015.5-2018.9 上海交通大学机械与动力工程学院博士后

2017.9-2018.9 加州大学伯克利分校博士后

◆ 先进制造/超精密加工研究方向
 微细复杂结构（微孔等）磨料流抛光
 复杂形状表面加热辅助化学机械复合磨料流抛光
 金刚石薄膜涂层刀具、模具及耐磨器件的制备及应用
◆ 微纳机器人微纳测控及量子传感研究方向
 金刚石微纳测控器件（传感器、微电极）的设计制造及应用
 量子传感用高浓度NV色心金刚石的制备机理及工艺研究
◆ 医工结合研究方向
 金刚石-钛合金植入物的界面特性、制备及应用研究
 金刚石微流道、微纳米针及纳米微粉在医学检测中的应用基础研究
◆ 表面工程研究方向
 HFCVD及MPCVD金刚石薄膜沉积设备、工艺、性能表征及应用研究
 金刚石材料的氧化特性研究及其表面光整加工（磨料流-化学机械抛光）

1. 2020年2016级本科毕业设计“动力电池系统可靠性耐久性台架试验研究”（3人）
2. 2020年第37期PRP项目“金刚石微型压力传感器的设计与制备”（1人）
3. 2020年暑期科研实习项目“金刚石性能调控、精密加工及其在微纳传感器中的应用”（2人）
4. 2020年暑期科研实习项目“基于理论计算与仿真的差分电容微纳传感器结构设计”（1人）
5. 2020秋季学期课程“设计与制造II”

2020.01-2023.01 广东省重点领域研发计划项目 (2020B010185001) 超硬材料及其在典型工程中的应用研究 交大负责人
2019.11-2021.10 上海市浦江人才计划D类(2019PJF021) 氮掺杂金刚石薄膜的抗氧化性能、表面抛光及微纳加工技术研究 负责人
2018.01-2020.12 国家自然科学基金 (51705320) 复杂形状表面金刚石薄膜加热辅助化学机械复合磨料流抛光机理及工艺研究 负责人
2018.10-2021.12 上海交通大学新一轮学科建设项目 (WF220402019)金刚石薄膜表面后处理及其应用研究 负责人
2019.01-2020.12 机械系统与振动国家重点实验室自主课题重点课题 (GKZD020029/010)硼掺杂金刚石薄膜的抗氧化性能研究、表面抛光及微纳加工
2016.07-2019.06 第9批中国博士后科学基金特别资助 (2016T90370) 一元/多元掺杂复合金刚石薄膜的制备及应用基础研究 负责人
2015.11-2017.10 第58批中国博士后科学基金 (15Z102060056) 硼掺杂复合金刚石薄膜的制备、优化及应用基础研究 负责人

1. X.C. Wang*, X. Song, H. Wang, Y. Qiao, K. Larsson, F.H. Sun, Selective control of oxidation resistance of diamond by dopings, ACS Applied Materials & Interfaces, accepted, 2020 (SCI)
2. X.C. Wang*, Y. Qiao, F.H. Sun, Influences of Si dopant on geometry and energetic stability of terminated diamond (111)-1x1 surfaces, Diamond and Related Materials, available online, 2020 (SCI)
3. X.C. Wang*, C.C. Wang, X.T. Shen, K. Larsson, F.H. Sun, DFT calculations of energetic stability and geometry of O-terminated B- and N-doped diamond (111)-1x1 surfaces, Journal of Physics: Condensed Matter, Vol.31, 2019: 265002 (SCI)
4. X.C. Wang*, C.C Wang, X.T. Shen, F.H. Sun, Tribological behaviors of the diamond films sliding against the T800/X850 CFRP laminates, Wear, Vol.418-419, 2019: 191-200 (SCI)
5. Juhong Chen*, Chun-Yen Liu, Xinchang Wang, Eric Sweet, Nathaniel Liu, Xiaohua Gong, Liwei Lin*, 3D printed microfluidic devices for circulating tumor cells (CTCs) isolation, Biosensors and Bioelectronics, Vol.150, 2019: 111900 (SCI)
6. X.T. Shen, X.C Wang, F.H. Sun*, Fabrication and evaluation of monolayer diamond grinding tools by hot filament chemical vapor deposition method, Journal of Materials Processing Technology, Vol.265, 2019: 1-11 (SCI)
7. H. Wang, X.T. Shen, X.C. Wang, F.H. Sun*, Simulation and experimental researches on the substrate temperature distribution of the large-capacity HFCVD setup for mass-production of diamond coated milling tools, Diamond and Related Materials, Vol.101, 2019, 107610 (SCI)
8. X.C. Wang*, C.C. Wang, C.Y. Wang, F.H. Sun, Approach for polishing diamond coated complicated cutting tool: Abrasive flow machining (AFM), Chinese Journal of Mechanical Engineering, Vol. 31, 2018: 97 (SCI)
9. X.C. Wang*, C.C. Wang, W.K. He, F.H. Sun, Co evolutions for WC-Co substrates with different Co contents during pretreatment and HFCVD diamond film growth processes, Transactions of Nonferrous Metals Society of China, Vol. 28, 2018: 469-486 (SCI)
10. X.C. Wang*, X.T. Shen, C. Zeng, F.H. Sun, Combined influences of tool shape and as-deposited diamond film on cutting performance of drills for CFRP machining, Surface and Coatings Technology, Vol. 347, 2018: 390-397 (SCI)
11. X.C. Wang*, C.C. Wang, F.H. Sun, B. Shen, Development and growth time optimization of the boron-doped micro-crystalline, undoped micro-crystalline and undoped fine-grained composite diamond film, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.232, 2018: 1244-1258 (SCI)
12. C.C. Wang, X.C. Wang, F.H. Sun*, Fabrication and application of nano/microcrystalline composite diamond coated drawing dies using alternative carbon sources, Transactions of Nonferrous Metals Society of China, Vol.28, 2018: 1602-1610 (SCI)
13. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, High-speed drawing of al alloy wire by diamond-coated drawing die under environmentally friendly water-based emulsion lubrication, Journal of Manufacturing Science and Engineering, Vol. 140, 2018: 124502 (SCI)
14. X.C. Wang, C.C. Wang, F.H. Sun*, C.Y. Ding, Simulation and experimental researches on HFCVD diamond film growth on small inner-hole surface of wire-drawing die with no filament through the hole. Surface and Coatings Technology, Vol. 339, 2018: 1-13 (SCI)
15. C.C. Wang, X.C. Wang, F.H. Sun*. Tribological behavior and cutting performance of monolayer, bilayer and multilayer diamond coated milling tools in machining of zirconia ceramics. Surface and Coatings Technology, Vol.353, 2018: 49-57 (SCI)
16. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, Tribological properties of diamond films for high-speed drawing Al alloy wires using water-based emulsions, Tribology International, Vol. 123, 2018: 92-104 (SCI)
17. X.C. Wang*, X.T. Shen, J.F. Gao, F.H. Sun, Consecutive deposition of amorphous SiO2 interlayer and diamond film on graphite by chemical vapor deposition, Carbon, Vol. 117, 2017: 126-136 (SCI)
18. X.C. Wang*, X.T. Shen, G.D. Yang, F.H. Sun, Evaluation of boron-doped-microcrystalline/nanocrystalline diamond composite coatings in drilling of CFRP. Surface and Coatings Technology, Vol. 330, 2017: 149-162 (SCI)
19. 王新昶*，王成川，孙方宏，沈彬，HFCVD金刚石薄膜涂层小孔径拉丝模的制备及应用研究，超硬材料工程，第29卷，2016: 35-42
20. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Influence of boron doping level on basic properties and erosion behavior of boron-doped micro-crystalline diamond (BDMCD) film, Diamond and Related Materials, Vol.73, 2017: 218-231 (SCI)
21. X.C. Wang*, C.C. Wang, X.T. Shen, F.H. Sun, Potential material for fabricating optical mirrors: polished diamond coated silicon carbide, Applied Optics, Vol.56, 2017: 4113-4122 (SCI)
22. X.T. Shen, X.C. Wang, F.H. Sun*, C.Y. Ding, Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates, Diamond and Related Materials, Vol.73, 2017: 7-14 (SCI)
23. T.Q. Zhao, X.C. Wang, F.H. Sun*, The effects of boron doping on residual stress on HFCVD diamond film for MEMS applications, Surface Review and Letters, Vol.25, 2018: 1850039 (SCI)
24. 赵天奇，王新昶，孙方宏*，低残余应力HFCVD硼掺杂金刚石薄膜的制备与图形化研究，金刚石与磨料磨具工程，第37卷第1期，2017: 29-33
25. 丁超越，孙方宏*，王新昶，基于不穿丝技术的小孔径拉丝模HFCVD金刚石涂层的温度场仿真及实验研究，真空科学与技术学报，第37卷第6期，2017: 1-7（中文EI）
26. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Growth time optimization of fine grained diamond coated drills for machining CFRP, Materials Science Forum, Vol.836-837, 2016: 333-339
27. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Mechanical properties and erosion performances of MCD films synthesized using different carbon sources by BE-HFCVD, International Journal of Refractory Metals and Hard Materials, Vol.54, 2016: 370-377 (SCI)
28. X.C. Wang*, X.T. Shen, F.H. Sun, B. Shen, Simulation optimization of filament parameters for uniform depositions of diamond films on surfaces of ultra-large circular holes, Applied Surface Science, Vol.388, 2016: 593-603 (SCI)
29. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Tribological properties of MCD films synthesized using different carbon sources when sliding against stainless steel, Tribology Letters, Vol.61, 2016: 1-16 (SCI)
30. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Tribological properties of SiC-based MCD films synthesized using different carbon sources when sliding against Si3N4, Applied Surface Science, Vol.369, 2016: 448-459 (SCI)
31. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Uniform deposition of chemical vapor deposition diamond films on slender tungsten wires, Materials Science Forum, Vol.848, 2016: 618-623
32. 王新昶*，申笑天，赵天奇，孙方宏，沈彬，复合金刚石薄膜涂层铝塑复合管拉拔模的制备及应用（上），超硬材料工程，第28卷第2期，2016: 20-23
33. 王新昶*，申笑天，赵天奇，孙方宏，沈彬，复合金刚石薄膜涂层铝塑复合管拉拔模的制备及应用（下），超硬材料工程，第28卷第3期，2016: 35-40
34. 王新昶*，王成川，孙方宏，沈彬，金刚石薄膜涂层扇形孔绞线紧压模的制备、抛光及应用研究，中国表面工程，第29卷，2016: 75-82（中文EI）
35. 申笑天，沈彬，王新昶，赵天奇，孙方宏*，铜基体表面CVD单晶金刚石微粉的制备，金刚石与磨料磨具工程，第36卷第6期，2016: 20-24
36. X.C. Wang, T.Q. Zhao, F.H. Sun*, B. Shen, Comparisons of HFCVD diamond nucleation and growth using different carbon sources, Diamond and Related Materials, Vol.54, 2015: 26-33 (SCI)
37. X.C. Wang, Z.C. Lin, B. Shen, F.H. Sun*, Effects of deposition parameters on HFCVD diamond films growth on inner hole surfaces of WC-Co substrates, Transactions of Nonferrous Metals Society of China, Vol.25, 2015: 791-802 (SCI)
38. X.C. Wang, L. Wang, B. Shen, F.H. Sun*, Friction and wear performance of boron doped, undoped microcrystalline and fine grained composite diamond films, Chinese Journal of Mechanical Engineering, Vol.28, 2015: 155-163 (SCI)
39. 王新昶*，申笑天，孙方宏，沈彬，HFCVD硼掺杂复合金刚石薄膜的机械性能研究，金刚石与磨料磨具工程，第35卷第6期，2015: 8-13, 18
40. 徐杰，王新昶*，超高强度钢内螺纹铣削用涂层刀具及工艺研究，武汉纺织大学学报，第28卷第6期，2015: 90-94
41. J.G. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Effect of deposition parameters on micro- and nano-crystalline diamond films growth on WC-Co substrates by HFCVD, Transactions of Nonferrous Metals Society of China, Vol.24, 2014: 1-8 (SCI)
42. X.C. Wang, J.G. Zhang, B. Shen, T. Zhang, F.H. Sun*, Erosion mechanism of the boron-doped diamond films of different thicknesses, Wear, Vol.312, 2014:1-10 (SCI)
43. X.C. Wang, Y.X. Cui, J.G. Zhang, B. Shen, F.H. Sun*, Erosive wear performance of boron doped diamond films on different substrates, Proceedings of the Institution of Mechanical Engineers, Part J: Engineering Tribology, Vol.228, 2014: 352-361 (SCI)
44. X.C. Wang, J.G. Zhang, B. Shen, T. Zhang, F.H. Sun*, Fracture and solid particle erosion of micro-crystalline, nano-crystalline and boron-doped diamond films, International Journal of Refractory Metals and Hard Materials, Vol.45, 2014: 31-40 (SCI)
45. X.C. Wang, X.L. Lei, L. Cheng, F.H. Sun*, B. Shen, Simulation-based optimal design of HFCVD equipment adopted for mass production of diamond films on inner-hole surfaces, Surface Review and Letters, Vol.20, 2014: 1450066-1-14 (SCI)
46. 刘建锦，张韬，王新昶，沈彬，孙方宏*，基于HFCVD法密封环基体的温度场仿真及实验，金刚石与磨料磨具工程，第34卷第2期，2014: 1-5
47. 程雷，张建国，王新昶，张韬，沈彬，孙方宏*，热丝法批量制备金刚石涂层钻头参数仿真优化，上海交通大学学报，第48卷第11期，2014: 1600-1605
48. J.G. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Effect of boron and silicon doping on improving the cutting performance of CVD diamond coated cutting tools in machining CFRP, International Journal of Refractory Metals and Hard Materials, Vol.41, 2013: 285-292 (SCI)
49. X.C. Wang, Z.C. Lin, T. Zhang, B. Shen, F.H. Sun*, Fabrication and application of boron-doped diamond coated rectangular-hole shaped drawing dies, International Journal of Refractory Metals and Hard Materials, Vol.41, 2013: 422-431 (SCI)
50. X.C. Wang*, S.L. Chen, B. Shen, F.H. Sun, Frictional and wear behavior of micro-crystalline and nano-crystalline diamond films, Advanced Materials Research, Vol.797, 2013: 719-724
51. X.C. Wang, J.G. Zhang, F.H. Sun*, T. Zhang, B. Shen, Investigations on the fabrication and erosion behavior of the composite diamond coated nozzles, Wear, Vol.304, 2013: 126-137 (SCI)
52. X.C. Wang, T. Zhang, B. Shen, J.G. Zhang, F.H. Sun*, Simulation and experimental research on the substrate temperature distribution in HFCVD diamond film growth on the inner hole surface, Surface and Coatings Technology, Vol.219, 2013: 109-118 (SCI)
53. J.G. Zhang, T. Zhang, X.C. Wang, B. Shen, F. H. Sun*, Simulation and experimental studies on substrate temperature and gas density field in HFCVD diamond films growth on WC-Co drill tools, Surface Review and Letters, Vol.20, 2013: 1350020-1-10 (SCI)
54. L. Cheng, J.G. Zhang, X.C. Wang, T. Zhang, B. Shen, F.H. Sun*, Simulation of temperature distribution in HFCVD diamond films growth on WC-Co drill tools in large quantities, Key Engineering Materials, Vol.589-590, 2013: 399-404
55. X.C. Wang, J.G. Zhang, T. Zhang, B. Shen, F.H. Sun*, Simulation optimization of the heat transfer conditions in HFCVD diamond film growth inside holes, Surface Review and Letters, Vol.20, 2013: 1350031-1-13 (SCI)
56. T. Zhang, X.C. Wang, B. Shen, F.H. Sun*, Z.M. Zhang, The effect of deposition parameters on the morphology of micron diamond powders synthesized by HFCVD method, Journal of Crystal Growth, Vol.372, 2013: 49-56 (SCI)
57. X.C. Wang*, B. Shen, F.H. Sun, Z.M. Zhang, H.S. Shen, S.S. Guo, Deposition and application of CVD diamond films on the interior-hole surface of silicon carbide compacting dies, Key Engineering Materials,Vol.499, 2012: 45-50
58. X.C. Wang*, B. Shen, F.H. Sun, Deposition and characterization of boron-doped HFCVD diamond films on Ti, SiC, Si and Ta substrates, Applied Mechanics and Materials, Vol.217-219, 2012: 1062-1067
59. X.C. Wang*, B. Shen, F.H. Sun, CVD diamond films as wear-resistant coatings for relief valve components in the coal liquefaction equipment, Solid State Phenomena, Vol.175, 2011: 219-225
60. 王新昶，孙方宏*，沈彬，彭东辉，张志明，CVD金刚石涂层煤液化减压阀关键部件的制备，金刚石与磨料磨具工程，第31卷第186期，2011: 20-24
61. X.C. Wang*, F.H. Sun, B. Shen, Z.M. Zhang, S.S. Guo, Deposition and application of nanocrystalline diamond films on silicon carbide substrates, Nano-Micro Letters, Proceedings of Shanghai International Nanotechnology Cooperation Symposium, Special Issue, 2011: 29-32
62. 王新昶，孙方宏*，孙乐申，丁庆华，彭东辉，高压差高固含量减压阀的仿真优化设计，上海交通大学学报，第45卷第11期，2011: 1597-1601 (3)
63. T.Q. Zhao, W.S. Wang, X.C. Wang, F.H. Sun*, B. Shen, Comparison of residual stress in boron-doped MCD and NCD films deposited on Si substrates for MEMS manufacture, The 16th International Manufacturing Conference in China (IMCC), 2015: 1094-1100（会议论文）
64. X.C. Wang*, X.T. Shen, T.Q. Zhao, F.H. Sun, B. Shen, Cutting performance of abrasive flow machined NCD coated milling tools in peripheral finish-milling aluminum alloy, The 16th International Manufacturing Conference in China (IMCC), 2015: 73-79（会议论文）
65. 王新昶*，申笑天，孙方宏，沈彬，SiC基HFCVD金刚石薄膜的制备及镜面抛光，第十八届中国磨料技术学术会议，2015: 13-18（会议论文）

1. 孙方宏，王新昶，王华，复杂形状金刚石涂层刀具的HFCVD批量制备方法，中国，ZL201711280418.2（授权）
2. 申笑天，孙方宏，王新昶，郭松寿，张文骅，郭睿，制备硬质合金基体金刚石涂层的预处理方法，中国，ZL201610920894.5（授权）
3. 王新昶，郭松寿，孙方宏，沈彬，张志明，张文骅，金刚石涂层高温高压喷雾喷嘴的制备方法，中国，ZL201410005575.2（授权）
4. 孙方宏，彭东辉，张志明，郭松寿，王新昶，沈彬，金刚石涂层高温高压差阀的制备方法，中国，ZL201110330198.6 （授权）

1. 美国光学协会(The Optical Society of America)会员(Member)
2. Nano Letters, Carbon, Material Letters, Tribology International, Journal of Materials Processing Technology, Materials & Design, Surface and Coatings Technology, Diamond and Related Materials, Applied Surface Science, Measurement, Journal of Alloys and Compounds, Chinese Journal of Aeronautics等期刊审稿人

1. 2011年上海交通大学博士研究生新生奖学金
2. 2011年上海交通大学昭和电工奖学金一等奖
3. 2013年研究生国家奖学金
4. 2013年度上海交通大学第二批优秀博士学位论文培育基金
5. 2013年上海交通大学博士生学术论坛第十六期——暨“智能制造•智造中国”学术论坛“优秀报告奖”
6. 2014年研究生国家奖学金
7. 2015年上海市优秀毕业生
8. 2016年中国（国际）光整加工技术学术会议学术报告一等奖
9. 2016年中国金刚石相关材料及应用学术研讨会优秀论文
10. 2017年切削与先进制造技术学术会议优秀论文
11. 2017年上海交通大学博士后考核优秀
12. 2019年切削与先进制造技术学术会议优秀论文
13. 2019年上海市浦江人才D类
14. 2019年上海交通大学本科招生工作先进个人