主要成就
获奖：
2019年，获中国汽车工业科学技术进步特等奖（13/20）
2019年，获同济大学育才奖二等奖
2018年，获同济大学潍柴社会捐赠教育奖励金
2017年，获上海市科技进步一等奖（10/15）
2016年，入选“同济大学青年英才计划”攀登层次（跟踪项目）
2014年，入选“同济大学青年英才计划”-攀登层次
承担和参与的主要项目：
2020-2023 自增湿燃料电池微孔层的双通道设计及两相流传质动力学研究（主持）
2017-2020 国家重点研发计划: 高比功率燃料电池发动机研发（重大共性关键技术类）（主持）
2017-2020 国家自然科学基金面上项目: 燃料电池环境下特殊形貌Pt-M/C合金催化剂稳定机制研究 （主持）
2016-2020 科技部项目: 高性能低成本燃料电池电堆及关键材料的关键技术研究与工程化开发的 “基于电流密度分布的单电池性能测试解析技术研究”（主持）
2014-2015 国家自然科学基金: 质子交换膜燃料电池M@Pt/C核壳结构电催化剂的制备及衰减机理研究（主持）
2012-2016 中央高校基本科研: 车载工况下燃料电池在线电流密度分布特性及寿命衰减机理研究（主持）
2012-2016 国家自然科学基金: 基于二维网络电路法研究MEA电流密度分布特性及故障诊断（主持）
2012-2016 国家重大科学仪器设备开发专项: 燃料电池在线分区诊断测试子模块开发（主持）
2008-2009 教育部博士点基金: 催化剂在模拟车用工况下微观结构变化及燃料电池性能衰减机理研究（主持）
2007-2008 国家自然科学基金: 模拟车用工况下催化剂的微观结构变化对燃料电池性能的影响（主持）
2007-2008 壳牌公司国际合作项目: 用于现场制氢的二甲醚站重整器的开发（主持）
2006-2010 同济大学青年优秀人才培养行动计划: 氢氧燃料电池膜电极集合体及燃料电池电堆的研制（主持）
2007-2012 教育部: 节能与环保汽车创新引智基地(“111”创新引智基地)(2009年底开始承担基地秘书工作)
2008-2010 国家863项目: 5KW高温质子交换膜燃料电池样机、高温燃料电池环境适应性测试平台.，高温质子交换膜电极、电池堆技术的研发及其综合评估（参与）
2004-2006国际科技合作重点项目: 质子交换膜燃料电池(PEMFC)阴极空气杂质的影响与净化装置的研究（参与）
近五年代表性论文：
(1) Effect of heat treatment on the activity and stability of PtCo/C catalyst and application of in-situ X-ray absorption near edge structure for proton exchange membrane fuel cell[J]. Lin R, Zhao T, Shang M, et al. Journal of Power Sources, 2015, 293: 274-282.
(2) Evolution of thermal drifting during and after cold start of proton exchange membrane fuel cell by segmented cell technology[J]. Lin R, Lin X, Weng Y, et al. International Journal of Hydrogen Energy, 2015, 40(23): 7370-7381.
(3) Investigating the effect of start-up and shut-down cycles on the performance of the proton exchange membrane fuel cell by segmented cell technology[J]. Lin R, Cui X, Shan J, et al. International Journal of Hydrogen Energy, 2015, 40(43): 14952-14962.
(4) 钴-聚吡咯-碳载PtNi燃料电池催化剂的制备及应用[J]. 杨美妮, 林瑞, 范仁杰, 等.物理化学学报, 2015, 31(11): 002131-2138.
(5) Experimental study of variable operating parameters effects on overall PEMFC performance and spatial performance distribution[J]. Zhang Q, Lin R, Técher L, et al. Energy, 2016, 115: 550-560.
(6) Local resolved investigation of PEMFC performance degradation mechanism during dynamic driving cycle[J]. Shan J, Lin R, Xia S, et al. International Journal of Hydrogen Energy, 2016, 41(7): 4239-4250.
(7) The application of orthogonal test method in the parameters optimization of PEMFC under steady working condition[J]. Xia S, Lin R, Cui X, et al. International Journal of Hydrogen Energy, 2016, 41(26): 11380-11390.
(8) 酸处理石墨化碳载体对燃料电池催化剂性能的影响[J]. 闫海旭, 杨美妮, 曾浩, 等. 高等学校化学学报, 2016, 37(12): 2236-2245.
(9) Study of the two-phase dummy load shut-down strategy for proton exchange membrane fuel cells[J]. Zhang Q, Lin R, Cui X, et al. Journal of Power Sources, 2017, 341: 230-239.
(10) Local resolved investigation of hydrogen crossover in polymer electrolyte fuel cell[J]. Shan J, Gazdzicki P, Lin R, et al. Energy, 2017, 128: 357-365.
(11) Investigation of the internal behavior in segmented PEMFCs of different flow fields during cold start process. Rui Lin*, Yingshi Ren, Xuwei Lin. Energy. 2017, 123: 367-377.
(12) Parameter optimization of PEMFC stack under steady working condition using orthogonal experimental design. Liu D C, Xia S X, Lin R, et al. International Journal of Energy Research , 2018 (5).1-12.
(13) Stability of High-Performance Pt-Based Catalysts for Oxygen Reduction Reactions. Lin R, Cai X, Zeng H, et al. Advanced Materials, 2018,30,1705332.
(14) Rapid microwave-assisted solvothermal synthesis of shape-controlled Pt-Ni alloy nanoparticles for PEMFC. Lin R, Cai X, Zeng H, et al. Electrochimica Acta. 2018(283):764-771.
(15) Structure optimization of anode parallel flow field for local starvation of proton exchange membrane fuel cell. Zhong D, Lin R, Liu D C, et al. Journal of Power Sources. 2018(403):1-10.
(16) EIS and local resolved current density distribution analysis on effects of MPL on PEMFC performance at varied humidification. Shan J, Lin R, Chen X D, et al. International Journal of Heat and Mass Transfer. 2018(127):1076-1083.
(17) Comparison Between the Constant Dummy Load and Step Load Shut-Down Strategy for PEMFCs. Xia S X, Lin R, Zhang Q, Dutruel B. Fuel cells. 2018(18):306-314.
(18) Impact of dummy load shut-down strategy on performance and durability of proton exchange membrane fuel cell stack. Yang Y, Li W B, Lin R. Journal of Power Sources. 2018(404):126-134.
(19) Investigation of the effect of cathode stoichiometry of proton exchange membrane fuel cell using localized electrochemical impedance spectroscopy based on print circuit board. Dengcheng Liu, Rui Lin , Bowen Feng, Zhen Yang. International Journal of Hydrogen Energy. 2019(44):7564-7573.
(20) Consistency analysis of polymer electrolyte membrane fuel cell stack during cold start . Rui Li , Yike Zhua, Meng Ni, Zhenghua Jiang, Diming Lou, Lihang Han, Di Zhong. Applied Energy. 2019(241):420-432.
(21) Investigation on cold start of polymer electrolyte membrane fuel cells with different cathode serpentine flow fields. Yike Zhu, Rui Lin, Zhenghua Jiang, Di Zhong, Bohan Wang, Wangyi Shangguan, Lihang Han. International Journal of Hydrogen Energy. 2019(44):7505-7517.
(22) One simple method to mitigate the structure degradation of alloy catalyst layer in PEMFC. Wenbin Li, Rui Lin*, Yue Yang. Electrochimica Acta. 2019. 323：134823
(23) Gram-Scale Synthesis of Well-Dispersed Shape-Controlled Pt-Ni/C as High-Performance Catalysts for the Oxygen Reduction Reaction. Xin Cai, Rui Lin* ,Dandan Shen, and Yu Zhu. ACS Appl. Mater. Interfaces. 2019.11: 29689−29697.
(24) Investigation of the effect of humidity at both electrode on the performance of PEMFC using orthogonal test method. Bohan Wang, Rui Lin*, Dengcheng Liu, Ji Xu, Bowen Feng. International journal of hydrogen energy. 2019. 44：13737-13743.
(25) Study on the Uncoupling Characteristics of PEM Fuel Cell by Segmented Cell Technology. Bowen Feng, Rui Lin* , Dengcheng Liu, Di Zhong. International Journal of ELECTROCHEMICAL SCIENCE. 2019. 14：2175-2186.
(26) Investigation on the reaction area of PEMFC at different position in multiple catalyst layer. Wenbin Li, Rui Lin*, Yue Yang. Electrochimica Acta.2019. 302：241-248.
(27) Localised electrochemical impedance spectroscopy investigation of polymer electrolyte membrane fuel cells using Print circuit board-based interference free system. Dengcheng Liu, Rui Lin⁎, Bowen Feng, Lihang Han, Yu Zhang, Meng Ni, Sai Wu, Applied Energy. 2019. 254: 113712
(28) Optimized microporous layer for improving polymer exchange membrane fuel cell performance using orthogonal test design. Rui Lin⁎, Xiaoyu Diao, Tiancai Ma⁎, Shenghao Tang, Liang Chen, Dengcheng Liu. Applied Energy. 2019. 254: 113714
(29) Stack shut-down strategy optimisation of proton exchange membrane fuel cell with the segment stack technology. Rui Lin*, Dengcheng Liu, Shixiang Xia, Tiancai Ma**, Benjamin Dutruel. International journal of hydrogen energy. 2019.
(30) High durability of Pt-Ni-Ir/C ternary catalyst of PEMFC by stepwise reduction synthesis. Rui Lin*, Lu Che, Dandan Shen, Xin Cai. Electrochimica Acta.2020: 135251.
(31) Low temperature durability and consistency analysis of proton exchange membrane fuel cell stack based on comprehensive characterizations. Di Zhong, Rui Lin*; Zhenghua Jiang, Yike Zhu, Dengchen Liu, Xin Cai, Liang Chen. Applied Energy. 2020: 114626
近五年专利：
(1) [发明授权] 授权公告号：CN106627052B/授权公告日：2019.03.01/发明人总数:4/发明人排序:1/专利名称:一种基于CDPF的汽车空调PM2.5过滤系统
(2) [发明授权] 授权公告号：CN106596115B/授权公告日：2018.10.26/发明人总数:5/发明人排序:2/专利名称: 一种发动机EGR流体模拟试验台
(3) [发明授权] 授权公告号：CN104156285B授权公告日：2018.07.06/发明人总数:6/发明人排序:2/专利名称: 基于VBA模块的分区燃料电池实验数据处理方法及系统
(4) [发明授权] 授权公告号：CN104538651B/授权公告日：2017.02.22/发明人总数:5/发明人排序:1/专利名称:用于X射线吸收精细结构谱测试的质子交换膜燃料电池
(5) [发明授权] 授权公告号：CN104111425B/授权公告日：2016.12.28/发明人总数:5/发明人排序:1/专利名称:一种燃料电池冷启动分区性能测试系统及测试方法
(6) [发明授权] 授权公告号：CN104282928B/授权公告日：2016.11.30/发明人总数:5/发明人排序:1/专利名称:一种可实现自动控制的燃料电池装配系统
(7) [发明授权] 授权公告号：CN103675694B/授权公告日：2016.11.02/发明人总数:8/发明人排序:1/专利名称:一种燃料电池电堆的在线分区检测系统及检测方法
(8) [发明授权] 授权公告号：CN104241664B/授权公告日：2016.07.13/发明人总数:5/发明人排序:1/专利名称:一种用于燃料电池氧还原反应的PtM/M' -Ppy-C 电催化剂及其制备方法
(9) [发明授权] 授权公告号：CN103576095B/授权公告日：2016.06.22/发明人总数:6/发明人顺序:1/专利名称:一种燃料电池内部性能实时检测系统及方法
(10) [发明授权] 授权公告号：CN103630861B/授权公告日：2016.04.20/发明人总数:5/发明人排序:1/专利名称:`燃料电池内部分区性能检测PCB板的标定装置及方法
(11) [发明授权] 授权公告号：CN103245920B/授权公告日：2015.08.19/发明人总数:3/发明人排序:1/专利名称:一种燃料电池多功能在线测试印刷电路板
(12) [发明公开] 申请公布号: CN110783592A/申请日期2020-02-11/发明人总数:3/发明人排序:1/专利名称: 一种含排水通道的燃料电池微孔层及其制备方法]
(13) [发明公开] 申请公布号: CN110635146A/申请日期2019-12-31/发明人总数:3/发明人排序:1/专利名称: 一种高性能Pt基三合金催化剂及其制备方法]
(14) [发明公开] 申请公布号: CN110492109A/申请日期2019-11-22/发明人总数:6/发明人排序:1/专利名称: 一种宽幅湿度自适应的燃料电池气体扩散层]
(15) [发明公开] 申请公布号: CN109828216A/申请日期2019-05-31/发明人总数:3/发明人排序:1/专利名称: 提高燃料电池分区电化学阻抗谱测量准确度的装置及方法]
(16) [发明公开] 申请公布号: CN109126819A/申请日期2018-08-21/发明人总数:4/发明人排序:1/专利名称: 一种高分散性碳载Pt-Ni催化剂的制备方法]
(17) [发明公开] 申请公布号: CN109273724A /申请日期2018-07-26/发明人总数:6/发明人排序:3/专利名称: 一种燃料电池气体扩散层及其制备方法]
(18) [发明公开] 申请公布号: CN108899558A /申请日期2018-06-07/发明人总数:2/发明人排序:1/专利名称: 一种PtCo/C电催化剂及其制备方法]
