2009.09 - 2013.06合肥工业大学机械与汽车工程学院工学学士

2017.09 - 2018.09普渡大学环境与生态工程学院联合培养博士研究生

2013.09 - 2019.06合肥工业大学机械工程学院工学博士

2019.07至今合肥工业大学机械工程学院讲师

主持与参与的研究课题

1.1.高端金属成形装备低碳制造的基础理论与关键技术研究(No. 51135004)，国家自然科学基金重点项目，2012年1月- 2016 年12月，参与

2.面向环境可持续性的数字化制造装备设计、制造与运行的基础理论研究(No. 51561125002)，国家自然科学基金国际(地区)合作与交流项目，2015年1月至2018年12月，参与

3.低碳设计与制造(No. 51722502)，国家自然科学基金优秀青年科学基金项目，2018年1月至今，参与

部分论文列表

1.Li Lei, Huang Haihong*, Zhao Fu, et al. An energy-saving method to solve the mismatch between installed and demanded power in hydraulic press[J]. Journal of Cleaner Production, 2016, 139: 636-645. (SCI)

2.Li Lei, Huang Haihong*, Zhao Fu, et al. A coordinate method applied to partitioned energy-saving control for grouped hydraulic presses[J]. Journal of Manufacturing Systems, 2016, 41: 102-110. (SCI)

3.Li Lei, Huang Haihong*, Zhao Fu, et al. Operation scheduling of multi-hydraulic press system for energy consumption reduction[J]. Journal of Cleaner Production, 2017, 165: 1407-1419. (SCI)

4.Li Lei, Huang Haihong*, Zhao Fu, et al. An energy-saving method by balancing the load of operations for hydraulic press[J], IEEE/ASME Transactions on Mechatronics. 2017, 22: 2673-2683.

5.Li Lei, Huang Haihong*, Zhao Fu, et al. Analysis of a novel energy-efficient system with double-actuator for hydraulic press[J]. Mechatronics, 2017, 47: 77-87. (SCI)

6.Li Lei, Huang Haihong*, Zhao Fu, et al. Modeling and analysis of the process energy for cylindrical drawing[J]. ASME. Journal of Manufacturing Science and Engineering, 2019, 141(2): 021001-13. (SCI)

7.Li Lei, Huang Haihong*, Zhao Fu, et al. Variations of energy demand with the process parameters in cylindrical drawing of stainless steel [J]. ASME. Journal of Manufacturing Science and Engineering, 2019，141(9):091002-14. (SCI)

8.Gao Mengdi, Li Lei*, Wang Qingyang, et al. Energy Efficiency and Dynamic Analysis of a Novel Hydraulic System with Double Actuator [J]. 2019, International Journal of precision engineering and manufacturing–green technology, DOI :10.1007/s40684-019-00182-6. (SCI)

9.Li Lei*, Huang Haihong, Li Xinyu, et al. An Improved Energy Matching Method to Utilize the Potential Energy of Large-sized Hydraulic Press at Multi-system Level[C]. Proceedings of the 24th CIRP Conference on Life Cycle Engineering, Kamakura, Japan, March 2017, 2017, 61: 547-552. (EI)

10.Li Lei, Huang Haihong*, Zhao Fu, et al. Power measurement in energy efficient manufacturing: Accuracy analysis, Challenges, and Perspectives for improvement [C]. Proceedings of the 26th CIRP Conference on Life Cycle Engineering, Purdue University, USA, May 2019, 2019, 80:138-143. (EI)

11.刘志峰,李磊,黄海鸿,高梦迪,李新宇.液压机驱动系统分区控制节能方法[J].中国机械工程,2016,27(14):1942-1948.

部分专利列表

1.刘志峰, 李磊, 等. 以组对形式实现势能相互利用的液压机组及其驱动方式[P]. ZL.201510400282.9.

2.刘志峰, 李磊, 等. 以组对形式实现势能相互利用的液压机组[P]. ZL 201610972704.4.

3.刘志峰, 李磊, 等. 一种液压机组节能驱动系统及其协调控制方法[P]. ZL 201610133432.9.

4.刘志峰, 李磊, 等. 一种节能型双执行单元液压机系统及控制方法[P]. ZL 201610326074.3.

5.刘志峰, 李磊, 等. 一种双执行单元液压机[P]. ZL 201611083061.4.

6.刘志峰, 李磊, 等. 一种液压机组节能驱动系统的协调控制方法[P]. ZL 201710509685.6.

7.刘志峰, 李磊, 等. 一种机液混合驱动的双工位压力机执行系统及其控制方法[P]. ZL 201710765672.5.

8.刘志峰, 李磊, 等. 一种双执行单元液压机的控制方法[P]. ZL 201810052097.9.

9.李磊，黄海鸿，邹翔，等. 一种多机生产线的能量服务化系统及控制方法[P]. 201911224857.0. (已受理)

10.李磊，黄海鸿，吕清宇，等. 一种冲压工艺的分布式电磁控压边系统及其控制方法[P]. 202010022786.2. (已受理)