国家级人才，IEEE高级会员，IEEE多个会议和期刊审稿人，Sigma Xi会员，中国电工技术学会高级会员。华中科技大学教授、博导，现任校学位评定委员会委员，强电磁工程与新技术国家重点实验室副主任，电机及控制工程系主任，新型电机国家地方联合工程研究中心主任，创新电机技术研究中心主任。1993、1996年分获清华大学学士、硕士学位。2002年获美国威斯康辛大学麦迪逊分校博士学位。博士毕业后，任美国通用电气公司（GE）全球研发中心总部高级专业工程师。2010年全职回国加入华中科技大学。2011年9月成立创新电机技术研究中心，中心定位于基础和应用研究，立足国际科技前沿，以满足国家重大战略需求为出发点，以培养具有创新精神、实践能力、全面发展的高层次人才为目标，力争在电机设计和驱动控制技术方面成为世界一流的科技创新研究平台。

Z. Fang, D.   Jiang, Z. Shen and R. Qu, "Impact of application of SiC devices in motor   drive on EMI," 2017 IEEE Applied Power Electronics   Conference and Exposition (APEC), Tampa, FL, 2017, pp. 652-658.    T. Zou, D. Li, R. Qu and D. Jiang, "Performance Comparison of Surface   and Spoke-Type Flux-Modulation Machines With Different Pole Ratios," in IEEE   Transactions on Magnetics, vol. 53, no. 6, pp. 1-5, June 2017.  doi: 10.1109/TMAG.2017.2662081    S. Jia, R. Qu, J. Li, D. Li and H. Lu, "Comparison of Stator DC Current   Excited Vernier Reluctance Machines With Different Field Winding   Configurations," in IEEE Transactions on Magnetics,   vol. 53, no. 6, pp. 1-4, June 2017.    Y. Gao, R. Qu, D. Li and F. Chen, "Force Ripple Minimization of a Linear   Vernier Permanent Magnet Machine for Direct-Drive Servo Applications,"   inIEEE Transactions on   Magnetics, vol. 53, no. 6, pp. 1-5, June 2017.      S. Jia, R. Qu, D. Li, J. Li and W. Kong, "Improved Torque Capacity for   Flux Modulated Machines by Injecting DC Currents Into the Armature   Windings," in IEEE Transactions on Magnetics,   vol. 53, no. 6, pp. 1-5, June 2017.    K. Xie, D. Li, R. Qu and Y. Gao, "A Novel Permanent Magnet Vernier   Machine With Halbach Array Magnets in Stator Slot Opening," in IEEE   Transactions on Magnetics, vol. 53, no. 6, pp. 1-5, June 2017.      S. Jia, R. Qu, J. Li, D. Li and W. Kong, "A Stator-PM Consequent-Pole   Vernier Machine With Hybrid Excitation and DC-Biased Sinusoidal   Current," inIEEE   Transactions on Magnetics, vol. 53, no. 6, pp. 1-4, June 2017.  doi: 10.1109/TMAG.2017.2665580    N. Duan, W. Xu, S. Wang, J. Zhu, R. Qu and S. Jia, "A   Temperature-Dependent Hysteresis Model for Soft Ferrites," in IEEE   Transactions on Magnetics, vol. 53, no. 6, pp. 1-4, June 2017.    T. Zou, D. Li, R. Qu, J. Li and D. Jiang, "Analysis of a Dual-Rotor,   Toroidal-Winding, Axial-Flux Vernier Permanent Magnet Machine," in IEEE   Transactions on Industry Applications, vol. 53, no. 3, pp.   1920-1930, May-June 2017.    Y. Gao, R. Qu, D. Li and J. Li, "Torque Performance Analysis of   Three-Phase Flux Reversal Machines," in IEEE   Transactions on Industry Applications, vol. 53, no. 3, pp.   2110-2119, May-June 2017.    W. Kong, R. Qu, M. Kang, J. Huang and L. Jing, "Air-Gap and Yoke Flux   Density Optimization for Multiphase Induction Motor Based on Novel Harmonic   Current Injection Method," in IEEE Transactions on Industry Applications,   vol. 53, no. 3, pp. 2140-2148, May-June 2017.      X. Ren; D. Li; R. Qu; T. Zou, "A Brushless Dual-mechanical-port   Dual-electrical-port Machine with Spoke Array Magnets in Flux   Modulator," in IEEE   Transactions on Magnetics ,   vol.PP, no.99, pp.1-1