学习与工作简历：

1988.9-1992.7 佳木斯工学院机械二系铸造专业本科学习，获学士学位

1992.7-1994.8 哈尔滨第一机器制造厂铸钢分厂，技术员

1994.9-1996.8 哈尔滨工业大学材料科学与工程学院材料加工工程专业，获硕士学位

1996.9-1999.9 哈尔滨工业大学材料科学与工程学院材料加工工程专业，获博士学位

1999.9-2000.1 哈尔滨工业大学材料科学与工程学院，讲师

2000.1-2001.9 上海交通大学材料科学与工程流动站，博士后

2001.9-2011.12 上海交通大学材料科学与工程学院，副教授

2012.1-今  上海交通大学材料科学与工程学院  研究员

 

从事专业：铸造，材料加工工程研究方向一特种铸造研究方向二铝、镁合金材料开发研究情况一直从事特种铸造（低压铸造、熔模铸造等）、有色合金熔炼、熔体净化技术等研究，发明了熔体脉冲旋转喷吹净化方法。在铝、镁合金材料开发、组织细化、性能调控方面，也做过深入研究。负责、参加和完成了国防预研、国家重点研发、航天基金、企业横向等项目40余项，研究经费2000万元，发表论文70余篇，申请专利22项，获国家级科技进步奖2项，获省部级科技进步奖6项。讲授主要课程教学研究毕业博士生数2毕业硕士生数9参加学术团体、任何职务中国机械工程学会铸造分会特种铸造及有色合金技术委员会 委员

代表性论文、论著

1. G.P. Xu, K. Wang*, X.P. Dong, L. Yang, H.Y. Jiang, et al. Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys, Metallurgical and Materials Transactions A, 2020, Online.

2. G.P. Xu, K. Wang*, X.P. Dong, H.Y. Jiang*, et al. Multiscale corrosion-resistance mechanisms of novel ferrous alloys in dynamic aluminum melts, Corrosion Science, 2020, 163: 108276.

3. K. Wang*, G.P. Xu, H.Y. Jiang*, et al. Effects of TiC_0.5N_0.5 nanoparticles on the microstructure, mechanical and thermal properties of TiC_0.5N_0.5/Al-Cu nanocomposites, Journal of Materials Research and Technology, 2020, 9(2): 2044.

4. J. Wei, Q.D. Wang*, D.D. Yin, L. Zhang, H. Zhou, B. Ye, H.Y. Jiang, and W.J. Ding. Extra Strain Hardening in High Pressure Die Casting Mg-Al-RE Alloy, Metallurgical and Materials Transactions A, 2020, 51: 1487-1492.

5. K. Wang*, X. Lv, Y.M. Zhu, H.Y. Jiang*, et al. In-situ synthesis of novel Al-PO master alloy and its refinement and modification effects on Si phases in hypereutectic Al-30Si alloys, Materials Characterization, 2019, 157: 109900.

6. K. Wang*, G.P. Xu, H.Y. Jiang*, et al. Development of Al-TiCN nanocomposites via ultrasonic assisted casting route, Ultrasonics sonochemistry, 2019, 58: 104626.

7. G.P. Xu, K. Wang*, X.P. Dong, H.Y. Jiang, et al. Experimental and Theoretical Research on the Corrosion Resistance of Ferrous Alloys in Aluminum Melts, Metallurgical and Materials Transactions A, 2019, 50(10): 4665-4676.

8. G.P. Liu, Q.D. Wang*, L. Zhang, B. Ye, H.Y. Jiang, and W.J. Ding. Effects of melt-to-solid volume ratio and pouring temperature on microstructures and mechanical properties of Cu/Al bimetals in compound casting process, Metallurgical and Materials Transactions A, 2019, 50A, (1): 401-414.

9. G.P. Liu, Q.D. Wang*, Z.P. Shang, L.G. Luo, H.Y. Jiang, and W.J. Ding. An Investigation on Microstructures and Mechanical Properties of Ultra-Low Cu Layer Thickness Ratio Cu/8011/1060 Clads, Metallurgical and Materials Transactions A, 2019, 50(12): 5866-5876.

10. L. Zhang, Q.D. Wang*, W.J. Liao, W. Guo, B. Ye, W.Z Li, H.Y. Jiang, W.J. Ding. Effects of cyclic extrusion and compression on the microstructure and mechanical properties of AZ91D magnesium composites reinforced by SiC nanoparticles, Materials Characterization, 2017, 126:17-27.

11. K. Wang, H.Y. Jiang*, Q.D. Wang, et al. A novel method to achieve grain refinement in aluminum, Metallurgical and Materials Transactions A, 2016, 47(10): 4788-4794.

12. K. Wang, H.Y. Jiang*, Q.D. Wang, et al. Nanoparticle-induced nucleation of eutectic silicon in hypoeutectic Al-Si alloy, Materials Characterization, 2016, 117: 41-46.

13. K. Wang, H.Y. Jiang*, Q.D. Wang, et al. Influence of nanoparticles on microstructural evolution and mechanical properties of Sr-modified Al-10Si alloys, Materials Science and Engineering: A, 2016, 666: 264-268.

14. K. Wang, H.Y. Jiang*, Y.X. Wang, et al. Microstructure and mechanical properties of hypoeutectic Al–Si composite reinforced with TiCN nanoparticles, Materials & Design, 2016, 95: 545-554.

15. K. Wang, H.Y. Jiang*, Y.W. Jia, et al. Nanoparticle-inhibited growth of primary aluminum in Al–10Si alloys, Acta Materialia, 2016, 103: 252-263.申请专利

22项

1.蒋海燕, 孙宝德, 倪红军, 王渠东, 丁文江，铝合金熔体除氢旋转脉冲喷吹方法，ZL00125770.6

2.蒋海燕, 孙宝德, 倪红军, 王渠东, 丁文江，铝合金熔体除氢旋转脉冲喷吹装置，ZL00125771.4

3.王迎新、蒋海燕、曾小勤、卢大、丁文江，镁合金焊丝的挤压生产方法，ZL200710036341.4 荣誉和奖励

镁合金稀土强韧化的基础研究，上海市自然科学二等奖，2016年，3/5

铝溶体电磁纯净化技术及其应用，国家技术发明二等奖，2006年，6/6

其他“特种铸造及有色合金”期刊编委