学习与工作简历：

2014.07-2014.10     新南威尔士大学  访问学者

2011.02-至今      上海交通大学材料科学与工程学院, 工程师  

2007.08 -2011.01    上海交通大学分析测试中心, 助理工程师，工程师

2011.09-2016.04     上海交通大学，材料科学与工程专业，博士

2004.09～2007.07    中科院金属研究所,材料物理与化学专业，硕士        

2000.09～2004.07    东北大学，材料成型与控制工程专业，学士

从事专业：材料科学与工程研究方向一金属基纳米复合材料研究方向二先进金属材料粉末冶金研究情况先后主持国家自然科学基金面上项目、科技部国际合作项目、国家电网科技项目、上海交大-西门子燃气轮机联合研发基金以及上海交大-新南威尔士大学国际合作基金等课题。作为主要成员参与国家重点研发计划，973项目以及国家自然科学基金等课题多项。申请国家发明专利27项，授权专利14项；在Acta Materialia、Nanoscale、Metallurgical and Materials Transactions A等国际著名期刊发表论文50余篇。讲授主要课程《材料的乐趣》教学研究毕业博士生数毕业硕士生数参加学术团体、任何职务上海市机械工程学会粉末冶金专业委员会委员，中国通用零部件协会粉末冶金分会会员。

代表性论文、论著

1.   Yuehuang Xie, Tian Xia, Dengshan Zhou, Yifei Luo, Wei Zeng, Zhen Zhang, Jun Wang, Jiamiao Liang* and Deliang Zhang*, A novel nanostructure to achieve ultrahigh strength and good tensile ductility of a CoCrFeNiMn high entropy alloy, Nanoscale 12 (2020) 5347

2.   Yuehuang Xie, Dengshan Zhou, Yifei Luo, Tian Xia, Wei Zeng, Chenguang Li, Jun Wang, Jiamiao Liang*, Deliang Zhang*，Fabrication of CoCrFeNiMn high entropy alloy matrix composites by thermomechanical consolidation of a mechanically milled powder，Materials Characterization 148 (2019) 307–316

3.   Yuehuang Xie, Yifei Luo, Tian Xia, Wei Zeng, Jun Wang, Jiamiao Liang*, Dengshan Zhou, Deliang Zhang*，Grain growth and strengthening mechanisms of ultrafine-grained CoCrFeNiMn high entropy alloy matrix nanocomposites fabricated by powder metallurgy，Journal of Alloys and Compounds 819 (2020) 152937

4.   Chenguang Li, Yuehuang Xie, Mingwei Zhang, Mianmian Ruan, Jun Wang, Jiamiao Liang*, Roland E. Loge, Deliang Zhang*，Enhanced strength and toughness of bulk ultrafine grained Cu by nacre-inspired lamellar structure，Journal of alloys and compounds 826（2020）154234

5.   Chenguang Li, Mingwei Zhang, Mianmian Ruan, Jun Wang, Jiamiao Liang*, Deliang Zhang*, A nanograins-attached and ultrathin Cu flake powder fabricated by high energy mechanical milling and dealloying, Materials Letters 265 (2020) 127432

6.   Chenguang Li, Wei Zeng, Yuehuang Xie, Jun Wang, Jiamiao Liang*, Roland E. Loge, Deliang Zhang* Annealing hardening and softening of an ultrafine grained Cu-4.5vol.%Al2O3 nanocomposite, Materials Science & Engineering A 778 (2020) 139126

7.   Chenguang Li, Yuehuang Xie, Dengshan Zhou, Wei Zeng, Jun Wang, Jiamiao Liang*, Deliang Zhang*, A novel way for fabricating ultrafine grained Cu-4.5 vol% Al2O3 composite with high strength and electrical conductivity, Materials Characterization 155 (2019) 109775

8.   Yifei Luo, Yuehuang Xie, Wei Zeng, Jiamiao Liang*, Deliang Zhang*, Microstructure and Mechanical Properties of Ti-6Al-4V Rods Fabricated by Powder Compact Extrusion of TiH₂/Al₆₀V₄₀ Powder Blend, Metallurgical and Materials Transactions A 50（2019）1643-1654

9.   Lei Cao, Wei Zeng, Yuehuang Xie, Jiamiao Liang*, Deliang Zhang*, Effect of powder oxidation on the anisotropy in tensile mechanical properties of bulk Al samples fabricated by spark plasma sintering, Materials Science & Engineering A 764 (2019) 138246

10. Lei Cao, Wei Zeng, Yuehuang Xie, Jiamiao Liang*, Deliang Zhang*，Effect of powder oxidation on interparticle boundaries and mechanical properties of bulk Al prepared by spark plasma sintering of Al powder，Materials Science & Engineering A，742 (2019) 305–308

11. J. M. Liang*, L. Cao, Y. H. Xie, Y. Zhou, Y. F. Luo, K. Q. Mudi, H. Y. Gao, J. Wang，Microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy joints produced by transient liquid phase bonding using spark plasma sintering，Materials Characterization 147 (2019) 116–126

12. X. Yao, Y.F. Zheng, M.Z. Quadir, C. Kong, J. M. Liang*, Y.H. Chen, P. Munroe, D.L. Zhang*, Grain growth and recrystallization behaviors of an ultrafine grained Al-0.6 wt%Mg-0.4 wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion, Journal of Alloys and Compounds 745 (2018) 519-524

13. J. M. Liang, Z. Zhang, M.T. Jia, L. Cao, C. G. Li, H.Y. Gao, J. Wang, D.L. Zhang, The microstructures and tensile mechanical properties of ultrafine grained and coarse grained Al-7Si-0.3Mg alloy rods fabricated from machining chips，Materials Science & Engineering A 729 (2018) 29–36

14. Wenjing Wang, Wei Zeng, Chenguang Li, Jiamiao Liang*, Deliang Zhang*, Microstructure and mechanical properties of ultrafine grained Cu-0.8 wt%C alloy with a bimodal microstructure produced by powder metallurgy techniques, Materials Science & Engineering A 712 (2018) 214–222

15. Tian Xia, Yuehuang Xie, Chao Yang, Wei Zeng, Zhongnan Bi, Jiamiao Liang*, Guoliang Zhu*, Jun Wang，Strengthening effects and thermal stability of the ultrafine grained microstructure of a nickel base superalloy at room and elevated temperatures，Materials Characterization 145 (2018) 362–370

X. Yao, Z. Zhang, Y. F. Zheng, C. Kong, M. Z. Quadir, J. M. Liang*, Y.H. Chen, P. Munroe, D.L. Zhang*，Effects of SiC Nanoparticle Content on the Microstructure and Tensile Mechanical Properties of Ultrafine Grained AA6063-SiCnp Nanocomposites Fabricated by Powder Metallurgy, Journal of Materials Science & Technology 33 (2017) 1023–1030

申请专利 27项荣誉和奖励

2019年中国电力科技进步三等奖；

2019年国家电网科技进步二等奖；

2013年上海交通大学SMC-晨星优秀青年教师奖励计划；

2015年上海交通大学教学成果1等奖。其他