学习工作经历

Education:

2006-2010: Philosophical Doctorate in Ecole Nationale Supérieure des Mines de Saint-Étienne (ENSM-SE), France,  in the department of Materials Science and Structures

2001-2005: Master in materials science and Engineering study in ENSM-SE

 Professional experiences:

03/2017-present: associate researcher in Chongqing University, China

07/2013-02/2017: Teacher-lecturer in CQU

 03/2011-07/2013: Post-PhD in CQU

10/2004-03/2005: Engineer intern at steelworks AUBERT et DUVAL in Firminy, France

05/2003-09/2003: technical internship in metallurgical combine of Magnitogorsk MMK, Russia

社会兼职

Occasional reviewer for international journals (Materials science and engineering A, Philosophical magazine, ….)
 

主讲课程
本科生课程:

塑性加工过程中数值模拟
 
研究生课程:

Simulations of plastic deformation for metals
 

学术专长
 mechanical tests; texture analysis, plastic deformation; crystal plasticity modeling; Aluminum: Magnesium; Titanium: Zirconium

主要研究方向
Modeling of plastic deformation in HCP

Visco-plastic self-consistent modeling

Twinning

科研项目

PI of NSFC project number 51250110079 from 2012 to 2013:‘Deformation mechanisms and theoretical study of Zirconium alloy at high temperature’.

PI of NSFC project number 51350110332 from 2013 to 2014:‘Activity of pyramidal <c+a> slip at room temperature in Mg alloy AZ31’.

PI of NSFC project from 2016 to 2018 :‘基于孪生变形的冷轧纯钛R值调控方法及其机理研究’

 Member of other projects

 
 论文及专著

A. Chapuis and J.H. Driver, The temperature dependency of slip and twinning in plane strain compressed magnesium single crystals, Acta Materialia 59 (2011) 1986-1994

A. Chapuis. P. Liu, Q. Liu, An experimental and numerical study of texture change and twinning-induced hardening during tensile deformation of an AZ31 magnesium alloy rolled plate, Materials Science & Engineering A 561 (2013)167–173

A. Chapuis, Low temperature plane strain compression of a magnesium single crystal with <c> axis constrained, Materials Science & Engineering A 590 (2014) 401–405

A. CHAPUIS, B.S. WANG, Q. LIU, A comparative study between uniaxial compression and plane strain compression of Mg-3Al-1Zn alloy using experiments and simulations, Materials Science & Engineering A 597 (2014) 349–358

A. Chapuis, Y.C. Xin, X.J. Zhou, Q. Liu, {10-12} Twin variants selection mechanisms during twinning, re-twinning and detwinning, Materials Science & Engineering A 612(2014) 431–439

A. Chapuis, Q. Liu, Simulations of texture evolution for HCP metals: Influence of the main slip systems, Computational Materials Science 97 (2015) 121–126

Z.Q. WANG, A. CHAPUIS, Q. LIU, Simulation of mechanical behavior of AZ31 magnesium alloy during twin-dominated large plastic deformation, Transactions of Nonferrous Metals Society of China 25 (2015) 3595-3603

C. Ma, A. Chapuis, X.Q. Guo, L.Y. Zhao, P.D. Wu, Q.Liu, X.B. Ma,  Modeling the deformation behavior of a rolled Mg alloy with the EVPSC-TDT model, Materials Science & Engineering A 682 (2017), 332-340

L.Y. Zhao, A. Chapuis, Y.C. Xin, Q. Liu, VPSC-TDT modeling and texture characterization of the deformation of a Mg-3Al-1Zn plate, Journal of Alloys and Compounds 710 (2017), 159-165

A. Chapuis, Q. Liu, Investigating the temperature dependency of plastic deformation in a Mg-3Al-1Zn alloy, Materials Science & Engineering A725 (2018), 108-118

L.Y. Zhao, X.Q. Guo, A. Chapuis, Y.C. Xin, Q. Liu, P.D. Wu, Strain-Path Dependence of {10-12} Twinning in a Rolled Mg–3Al–1Zn Alloy: Influence of Twinning Model, Metall. and Mater. Trans. A 50A (2019) 118-131

A. Chapuis, Q. Liu, Modeling strain rate sensitivity and high temperature deformation of Mg-3Al-1Zn alloy, Journal of Magnesium and Alloys 7 (2019) 433–443

 专利
 

表彰及奖励
 

科研团队

Deformation and microstructure of metals, leader: LIU Qing