学习工作经历
2005-2009年   东北大学  材料成型及控制工程  工学学士

2009-2011年   东北大学  轧制技术与连轧自动化国家重点实验室  工学硕士

2011-2016年   东北大学  轧制技术与连轧自动化国家重点实验室  工学博士

2014-2015年  加拿大麦吉尔大学  材料工程系  联合培养博士  导师：John J. Jonas

社会兼职

中国金属学会轧钢分会塑性加工理论与新技术学术委员会委员

"Materials & Design"、““Materials Science and Engineering A”、”"Journal of Nuclear Materials"、"Steel Research International"、"Journal of Materials Engineering and Performance"、"Acta Metallurgica Sinica (English Letters)"、"High Temperature Materials and Processes"等SCI期刊审稿人

中国核学会会员

主讲课程

本科生课程：金属轧制工艺学、轧制过程自动化

研究生课程

学术专长
 

主要研究方向

核电用耐蚀合金组织性能控制

铝合金搅拌摩擦加工技术

高温合金热加工性能优化
 

科研项目

国家自然科学基金青年基金，原子尺度下核电用Fe-Ni-Cr耐蚀合金动态应变时效微观机制研究，51701028，2018.01-2020.12，主持

国家重点实验室开放课题，核电耐蚀合金板材晶界析出行为原子尺度研究，2017RALKFKT005，2018.01-2019.12，主持

中央高校基本科研业务费，铁镍基合金冷轧及退火微观组织和力学性能研究，2016.09-2018.09，主持

论文及专著

期刊论文

1. Chenghang Zhang, Guangjie Huang, Yu Cao*, et al., On the microstructure and mechanical properties of similar and dissimilar AA7075 and AA2024 friction stir welding joints: Effect of rotational speed, Journal of Manufacturing Processes, 2019, 37: 470-487.
2. Chenghang Zhang, Guangjie Huang, Yu Cao*, et al., Optimization of tensile and corrosion properties dissimilar friction stir welded AA2024-7075 joints, Journal of Materials Engineering and Performance, 2019, 28: 183-199.
3. Yu Cao, Chenghang Zhang, Cheng Zhang, et al., Influence of dynamic strain aging on the mechanical properties and microstructural evolution for Alloy 800H during hot deformation,  Materials Science and Engineering A, 2018, 724: 37-44.
4. Yu Cao, Chenghang Zhang, Cheng Zhang, et al., Effect of dynamic strain aging and precipitation on the hot deformation behavior of 253MA heat-resistant alloy, Journal of Materials Science, 2019, 54: 1716-1727.
5. Yu Cao, Hongshuang Di, Guangjie Huang, On the grain boundary character distribution of Incoloy 800H during dynamic recrystallization, Journal of Nuclear Materials, 2017, 486: 21-25.
6. Yu Cao, Xinjun Shen, Hongshuang Di, et al., Texture and microstructure evolution of Incoloy 800H superalloy during hot rolling and solution treatment, Journal of Alloys and Compounds, 2017, 698: 304-316.
7. Yu Cao, Hongshuang Di, Grain boundary character distribution during the post-deformation recrystallization of Incoloy 800H at elevated temperature, Materials Letters, 2016, 163: 24-27.
8. Yu Cao, Hongshuang Di, Research on the hot deformation behavior of a Fe-Ni-Cr alloy (800H) at temperatures above 1000℃, Journal of Nuclear Materials, 2015, 465: 104-115. 
9. Yu Cao, Hongshuang Di, Jiecen Zhang, et al., Dynamic behavior and microstructural evolution during moderate to high strain rate hot deformation of a Fe-Ni-Cr alloy (Incoloy 800H), Journal of Nuclear Materials, 2015, 456: 133-141.
10. Yu Cao, Hongshuang Di, R.D.K. Misra, The impact of aging pre-treatment on the hot deformation behavior of Incoloy 800H at 750℃, Journal of Nuclear Materials, 2014, 452: 77-86.
11. Yu Cao, Hongshuang Di, R.D.K. Misra, et al., On the hot deformation behavior of AISI 420 stainless steel based on constitutive analysis and CSL model, Materials Science and Engineering A, 2014, 593: 111-119.
12. Yu Cao, Hongshuang Di, Jingqi Zhang, et al., An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel-chromium alloy (800H) during hot deformation, Materials Science and Engineering A, 2013, 585: 71-85.
13. Yu Cao, Hongshuang Di, R.D.K. Misra, et al., Hot deformation behavior of Incoloy 800H at intermediate temperatures: constitutive models and microstructure analysis, Journal of Materials Engineering and Performance, 2014, 23: 4298-4308.
14. Yu Cao, Hongshuang Di, R.D.K. Misra, Dynamic recrystallization behavior of AISI 420 stainless steel under hot compression, High Temperature Materials and Processes, 2015, 34: 155-161.
15. 曹宇，邸洪双，张敬奇，马天军，张洁岑，800H合金热变形行为及热加工性能研究，金属学报，2013, 49(7): 811-821.
16. 曹宇,邸洪双, 张洁岑, 张敬奇, 马天军，800H合金动态再结晶行为研究，金属学报，2012, 48(10): 1175-1185.
17. 曹宇，邸洪双，张敬奇，马天军，800H合金静态软化行为及其亚结构演变，材料科学与工艺，2013, 21(3): 95-104.
18. 曹宇，邸洪双，马天军，张敬奇，800H合金热变形行为研究，东北大学学报（自然科学版），2012, 33(2): 213-217.
19. Jiecen Zhang, Yu Cao, Guangwei Jiang, Hongshuang Di, Effect of annealing temperature on the precipitation behavior and texture evolution in a warm-rolled P-containing interstitial-Free high strength steel, Acta Metallurgica Sinica (English Letters), 2014, 27: 395-400.
20. Jingqi Zhang, Hongshuang Di, Xiaoyu Wang, Yu Cao, Jiecen Zhang, Tianjun Ma,Constitutive analysis of the hot deformation behavior of Fe-23Mn-2Al-0.2C twinning induced plasticity steel in consideration of strain, Materials and Design, 2013, 44: 354-364.
21. J. Zhao, W. Hu, X. Wang, J. Kang, Y. Cao, G. Yuan, H. Di, R.D.K. Misra, A novel thermo-mechanical controlled processing for large-thickness microalloyed 560 MPa (X80) pipeline strip under ultra-fast cooling, Materials Science and Engineering A, 2016, 673: 373-377.
22. Jingqi Zhang, Hongshuang Di, Hongtao Wang, Kun Mao, Tianjun Ma, Yu Cao, Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map, Journal of Materials Science, 2012, 47: 4000-4011.
23. 张洁岑，邸洪双，蒋光炜，曹宇，退火温度对含磷高强IF钢FeTiP析出行为的影响，东北大学学报（自然科学版），2014, 35(10): 1404-1407.
24. 蒋光炜，王春柳，曹宇，邸洪双，连续退火工艺对B250P钢组织性能的影响，东北大学学报（自然科学版），2014, 35(10): 1408-1411.

会议论文

1. 曹宇，邸洪双，易啸，杨耀华，张洁岑，2Cr13马氏体耐热钢时效处理中碳化物析出行为，第十三届塑性加工学术年会论文集，2013: 53-56. 
2. Hongshuang Di, Yu Cao, Jiecen Zhang, Yaohua Yang, Dynamic behavior and constitutive modeling of AISI 420 stainless steel at elevated temperature, The 11th Asia-Pacific Conference on Materials Processing, Auckland New Zealand, July 6-9, 2014. 
3. Guangwei Jiang, Jiecen Zhang, Yu Cao, Hongshuang Di, The precipitation behavior of ferritic-rolled and batch-annealed high strength interstitial free steel, The 11th Asia-Pacific Conference on Materials Processing, Auckland New Zealand, July 6-9, 2014. 
4. Guangwei Jiang, Hongshuang Di, Yu Cao, Zhongwei Zhang, Yafei Wang, Pengfei Sui, Flow stress prediction for B210P steel at hot working conditions, The 11th international conference on numerical methods in industrial forming processes: NUMIFORM 2013: 630-636.
5. 蒋光炜，邸洪双，曹宇，王春柳，王亚飞，B250P钢冷轧变形抗力模型，第十三届塑性加工学术年会论文集，2013: 381-384.
6. 张洁岑，邸洪双，蒋光炜，曹宇，杨耀华，王晓瑜，高强IF钢铁素体区热轧退火板的织构演变，第十三届塑性加工学术年会论文集，2013: 389-392.
7. 张中炜，邸洪双，曹宇，蒋光炜，铁素体区开轧温度对含磷高强IF钢组织性能影响，第十三届塑性加工学术年会论文集，2013: 385-388.

专利

表彰及奖励

2012年  教育部博士研究生学术新人奖

2012-2014年  博士研究生国家奖学金

2013年  沈阳市优秀研究生 

2015年 沈阳市自然科学学术成果三等奖

2017年 中国材料研究学会优秀博士学位论文奖

2017年 辽宁省优秀博士学位论文奖

2018年 重庆大学材料学院优秀党员

科研团队

“形变金属及微结构”科研团队成员，团队主页：http://www.qingliu.cqu.edu.cn/